■ Voice messages
If you subscribe to voice mail, your network operator will furnish you with a voice
mailbox number. You need to save this number to your device to use voice mail.
When you receive a voice message, your device beeps, displays a message, or both.
If you receive more than one voice message, your device shows the number of
voice messages received.
Save voice mailbox number
Your network operator may have already saved your voice mailbox number to
your device. Select
OK
to leave the number unchanged.
1. In the standby mode, select
Menu
>
Messages
>
Voice messages
>
Voice
mailbox number
. The voice mailbox number is displayed.
2. If the box is empty, enter the voice mailbox area code and number, and
select
OK
.
Call and setup voice mail
1. After you save the voice mailbox number, in the standby mode, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in the standby mode, press and hold 1; or select
Menu
>
Messages
>
Voice messages
>
Listen to voice messages
to dial the voice
mailbox number. When you connect and the prerecorded greeting begins, follow
the automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a 1-touch dialing location. Dialing codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialing string. See "Phone numbers with dialing codes," p. 35.
Voice mail services vary by network operator. The following instructions are
examples of common operations. Please check with your network operator for
specific instructions on using your voice mail service.
M e s s a g e s
35
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look similar to
the following:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and
press #.
Phone numbers with dialing codes
Dialing codes instruct the receiving system to pause, wait, bypass, or accept
the numbers that follow them in the dialing string. To set up dialing codes, do
the following:
1. In the standby mode, select
Menu
>
Contacts
>
1-touch dialing
.
2. Scroll to an
(empty)
1-touch dialing slot, and select
Assign
.
3. Enter your mailbox phone number, including the area code.
4. Enter any dialing codes as necessary after the entered phone number.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.
5. Enter any remaining pauses or other information that enables you to listen to
your messages, and select
OK
.
6. Enter a name (such as voice mail), and select
OK
.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
Insert dialing codes
Press * repeatedly to cycle through dialing codes. When the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
+—Replaced by the international access code.
w—Waits for you to press the call key before sending the numbers or codes
that follow.
M e s s a g e s
36
Clear voice mail icon
To clear the voice mail icon from the display, in the standby mode, select
Menu
>
Messages
>
Voice messages
>
Clear voice message icon
.